2011

1-20 of 34 < first | prev | | last >
  • When innovation meets regulation

    Paul Studebaker argues that government regulation doesn't hinder innovation, but ineffective and irresponsible regulation does.

    12/05/2011
  • Meet the ISSP Sustainability Hall of Fame inductees

    Paul Studebaker speaks about the inaugural class of the International Society of Sustainability Professionals (ISSP) Hall of Fame inductees, which were announced at the ISSP Conference 2011 in Portland, Oregon.

    10/12/2011
  • Compare arc flash events at different incident energy levels

    People in the business of working with electrical systems have experience working with typical system parameters. System voltage, current capacity, interrupt ratings and the like are common. If someone says they are working on a 480V 65kAIC system, most people have a frame of reference to understand exactly what that means. But how about calories?

    10/07/2011
  • Better welding, better career - Part I

    Maintenance Evangelist Joel Leonard interviews Ben Kaiser and Adam Ramthun, students at Lincoln Electric Welding School, about their career paths.

    07/15/2011
  • Why Precision Machinery Shaft Alignment

    Machinery Reliability Requires Precision Shaft Alignment: About 50% of vibration based damage to rotating machinery is directly related to misalignment. Well aligned machines reduce operating costs by increasing Mean Time Between Repairs and reduce power consumption. In other words, precision alignment will save you money.

    05/31/2011
  • IFS Summit 2011: Success in using maintenance: Part 4

    Tommy Massey, maintenance manager, Nucor Bar Mill Group, presents how Nucor Steel uses IFS for a complete maintenance solution, including recording information about buildings or equipment, fault reports, work orders, preventive maintenance, equipment monitoring and resource scheduling, during the April 2011 IFS North American Customer Summit in Itasca, Illinois.

    05/06/2011
  • IFS Summit 2011: Success in using maintenance: Part 3

    Tommy Massey, maintenance manager, Nucor Bar Mill Group, presents how Nucor Steel uses IFS for a complete maintenance solution, including recording information about buildings or equipment, fault reports, work orders, preventive maintenance, equipment monitoring and resource scheduling, during the April 2011 IFS North American Customer Summit in Itasca, Illinois.

    05/05/2011
  • IFS Summit 2011: Success in using maintenance: Part 2

    Tommy Massey, maintenance manager, Nucor Bar Mill Group, presents how Nucor Steel uses IFS for a complete maintenance solution, including recording information about buildings or equipment, fault reports, work orders, preventive maintenance, equipment monitoring and resource scheduling, during the April 2011 IFS North American Customer Summit in Itasca, Illinois.

    05/04/2011
  • IFS Summit 2011: Success in using maintenance

    Tommy Massey, maintenance manager, Nucor Bar Mill Group, presents how Nucor Steel uses IFS for a complete maintenance solution, including recording information about buildings or equipment, fault reports, work orders, preventive maintenance, equipment monitoring and resource scheduling, during the April 2011 IFS North American Customer Summit in Itasca, Illinois.

    05/03/2011
  • IFS Summit 2011: Integrating engineering and manufacturing: Part 3

    Matt Watters, P.E., business analyst, IFS, presents how to use IFS Product Data Management (PDM) for supporting engineering design, configuration control, advanced revision management and more integrated with manufacturing, during the April 2011 IFS North American Customer Summit in Itasca, Illinois.

    05/02/2011
  • IFS Summit 2011: Integrating engineering and manufacturing: Part 2

    Matt Watters, P.E., business analyst, IFS, presents how to use IFS Product Data Management (PDM) for supporting engineering design, configuration control, advanced revision management and more integrated with manufacturing, during the April 2011 IFS North American Customer Summit in Itasca, Illinois.

    05/01/2011
  • IFS Summit 2011: Integrating engineering and manufacturing

    Matt Watters, P.E., business analyst, IFS, presents how to use IFS Product Data Management (PDM) for supporting engineering design, configuration control, advanced revision management and more integrated with manufacturing, during the April 2011 IFS North American Customer Summit in Itasca, Illinois.

    04/30/2011
  • IFS Summit 2011: The service and asset management roadmap: Part 4

    Martin Gunnarsson, director of research and strategy, IFS, presents what is planned for improving support for outsourced service and maintenance operation, enhanced resource scheduling and improved work order reporting capabilities, during the April 2011 IFS North American Customer Summit in Itasca, Illinois.

    04/29/2011
  • IFS Summit 2011: The service and asset management roadmap: Part 3

    Martin Gunnarsson, director of research and strategy, IFS, presents what is planned for improving support for outsourced service and maintenance operation, enhanced resource scheduling and improved work order reporting capabilities, during the April 2011 IFS North American Customer Summit in Itasca, Illinois.

    04/28/2011
1-20 of 34 < first | prev | | last >