Moore Industries has released the THZ3 and TDZ3, the company’s next generation of Smart HART temperature transmitters. The THZ3 and TDZ3 2-wire (loop powered) transmitters provide an isolated and linear 4-20mA output proportional to input. They configure to accept a direct signal input from an array of sensors and analog devices including:
- 14 RTD types and nine thermocouple types
- Resistance and potentiometer devices
- Direct millivolt sources
The dual sensor input allows the THZ3 and TDZ3 to offer backup and fail-over protection, with either of the sensors or inputs to be designated as the primary measurement and the secondary input acting as a backup sensor in case of a primary sensor failure. Additionally, by utilizing this dual input capability, 15 THZ3 or TDZ3 transmitters can be multi-dropped on one digital HART loop to monitor 30 temperature points. This substantially lowers wiring costs.
Other benefits associated with the dual input sensors include:
- Average and Differential measurement to average the two input measurements or select either the differential (A-B or B-A) or absolute difference between the two inputs.
- High-Select and Low-Select features which enable the transmitter to continuously monitor two separate inputs and designate either the highest or lowest input as the source for the analog output or PV.
- Dynamic Variable Mapping that permits the user to assign either the input or the calculated result of the inputs to any of the four HART variables (PV, SV, TV and QV) that can be read by any HART-compatible host system.
The THZ3 and TDZ3 come with Device Intelligence, a series of features for smarter control and monitoring including:
- Sensor drift and corrosion detection that checks and alerts users when the sensor is drifting out of a preset range or when the resistance due to corrosion exceeds set parameters.
- Smart range alarms with four HART alarms – set to any input or calculated input – that detect when the variable is within or outside of user preset limits.
- A High Availability option that enables the selection of how the AO behaves when there is an input failure or out-of-range value detected by the transmitter. This prevents nuisance alarms on startups or batch process shutdowns.
- Input simulation capability allowing manual input of a direct or calculated value. This essentially simulates a real input, allowing users to test the AO or any HART diagnostic and range alarms.
Users can rely on the accuracy and dependability of the THZ3 and TDZ3. Their input-to-output analog accuracy of up to ±0.014°C (±0.025°F) utilizing sensor matching and trimming over a 100°F span is the absolute best in the industry. The transmitters feature 20-bit input resolution and deliver exceptional input accuracy for all sensor types.
The THZ3 and TDZ3 transmitters are HART 7 compliant with exception-based reporting and dynamic variable mapping. They are HART and DTM programmable with user-oriented basic configuration for fast and accurate setup. Utilizing the HART DD they can be configured and interrogated on the 4-20mA loop via any HART handheld communicator or HART compatible host. Users can also program or monitor the transmitters with any FDT compliant host or program, such as PACTware using the THZ3/TDZ3 DTM.