• 1660240936270 B25f2fa795eb41a3b1d967488f77df57

    Take your 3D-printed products to the next level with acetone vapors

    Feb. 2, 2018

    YouTuber DIY Perks demonstrates how to treat 3D-printed parts with an acetone vapor bath to make models that more closely resemble those made via injection molding.

    Additive manufacturing is poised to change the future of product design and creation, with 3D printers becoming cheaper and more readily available to the public. The only downside to home printing is that, unlike traditional injection-molded items, 3D-printed products can have ridged edges due to the layered method of production. In his latest video, YouTuber DIY Perks demonstrates how to treat 3D-printed parts with an acetone vapor bath to make models that more closely resemble those made via injection molding.

    b25f2fa7-95eb-41a3-b1d9-67488f77df57
    About the Author

    Alexis Gajewski | Senior Content Strategist

    Alexis Gajewski has over 15 years of experience in the maintenance, reliability, operations, and manufacturing space. She joined Plant Services in 2008 and works to bring readers the news, insight, and information they need to make the right decisions for their plants. Alexis also authors “The Lighter Side of Manufacturing,” a blog that highlights the fun and innovative advances in the industrial sector. 

    Continue Reading

    Sponsored Recommendations

    April 14, 2025
    This paper addresses where leaks commonly occur, leak detection methods, and practical advice for an audit and repair plan. You'll learn why an ongoing leak detection and repair...
    April 14, 2025
    This special report explores the latest innovations in compressed air tech to help your facility reduce artificial demand and achieve greater system control. You'll also gain ...
    April 14, 2025
    Here are some things you can do in between formal preventive maintenance visits on your electric screw compressor to extend compressor life and prevent downtime.
    April 14, 2025
    They cost more than refrigerated dryers. They need more parts and service than refrigerated dryers. They increase demand for compressed air. So when should you use a desiccant...