• 1660240936270 B25f2fa795eb41a3b1d967488f77df57

    DIY: How to build your own clamps

    June 7, 2018

    Why waste money purchasing a set of clamps when you can make them yourself?

    Clamps are the foundation of any good DIY project. Whether you are building a perfectly square frame, are gluing wood strips together for a custom butcher block tabletop, or need a second set of hands while you cut, sand, or paint your project, clamps can get the job done. But why waste money purchasing a set of clamps when you can make them yourself?

    b25f2fa7-95eb-41a3-b1d9-67488f77df57
    About the Author

    Alexis Gajewski | Senior Content Strategist

    Alexis Gajewski has over 15 years of experience in the maintenance, reliability, operations, and manufacturing space. She joined Plant Services in 2008 and works to bring readers the news, insight, and information they need to make the right decisions for their plants. Alexis also authors “The Lighter Side of Manufacturing,” a blog that highlights the fun and innovative advances in the industrial sector. 

    Continue Reading

    Sponsored Recommendations

    April 14, 2025
    This paper addresses where leaks commonly occur, leak detection methods, and practical advice for an audit and repair plan. You'll learn why an ongoing leak detection and repair...
    April 14, 2025
    Here are some things you can do in between formal preventive maintenance visits on your electric screw compressor to extend compressor life and prevent downtime.
    April 14, 2025
    They cost more than refrigerated dryers. They need more parts and service than refrigerated dryers. They increase demand for compressed air. So when should you use a desiccant...
    April 14, 2025
    Follow these ten steps for energy savings in your compressed air system.