Find the right word with the reliability pocket glossary
July 22, 2013
What is an ‘acid number’? How is it determined, and what does it mean for your equipment? Not sure? Download this pocket guide for the answer to this and many other questions from the definition of “beta rating” to the meaning of Z.D.D.P.
Here is an excerpt from the glossary:
"Abrasive Wear Type of wear that occurs between two surfaces in relative motion to each other due to particles (three-body abrasion) or the surface roughness (two-body abrasion).
Absolute Rating Refers to the size of the largest spherical particle that will pass through the element.
Absolute Viscosity Term used interchangeably with viscosity to distinguish it from kinematic viscosity; occasionally referred to as “dynamic viscosity”.
Acid Number The measurement of the acidity of an oil. It is determined by the milligrams of potassium hydroxide required to neutralize one gram of an oil sample. ASTM D664 uses a potentiometric titration; ASTM D974 uses a color-indicator titration. Also known as Neutralization Number."
This paper addresses where leaks commonly occur, leak detection methods, and practical advice for an audit and repair plan. You'll learn why an ongoing leak detection and repair...
Here are some things you can do in between formal preventive maintenance visits on your electric screw compressor to extend compressor life and prevent downtime.
They cost more than refrigerated dryers. They need more parts and service than refrigerated dryers. They increase demand for compressed air. So when should you use a desiccant...