Supplies at Work: Control system to keep power plant up and running

    July 16, 2012

    Yokogawa (www.yokogawa.com) Kontrol (Malaysia) Sdn. Bhd., has received an order from the CTCI Consortium to supply control systems and field devices for the Kimanis combined cycle power plant, which is being built for Kimanis Power Sdn. Bhd. in the Malaysian state of Sabah, in the northeast part of Borneo island.

    Yokogawa (www.yokogawa.com) Kontrol (Malaysia) Sdn. Bhd., has received an order from the CTCI Consortium to supply control systems and field devices for the Kimanis combined cycle power plant, which is being built for Kimanis Power Sdn. Bhd. in the Malaysian state of Sabah, in the northeast part of Borneo island.

    The Kimanis combined cycle power plant will have a total output of 300 MW (three 100 MW units). The first 100 MW units, now under construction, are scheduled to start operation in December 2013.

    This order is for a range of control and instrumentation including the CENTUM VP integrated production control systems for the power plant's boilers and its boiler and turbine auxiliary facilities; the ProSafe-RS safety instrumented system for safely shutting down the plant if any abnormal conditions occur; exhaust gas analyzers; and differential pressure/pressure transmitters. Yokogawa Kontrol (Malaysia) Sdn. Bhd. will be responsible for project execution, including engineering, installation, and commissioning services.

    Learn more about the Kimanis combined cycle power plant

    Continue Reading

    Sponsored Recommendations

    April 14, 2025
    This paper addresses where leaks commonly occur, leak detection methods, and practical advice for an audit and repair plan. You'll learn why an ongoing leak detection and repair...
    April 14, 2025
    Here are some things you can do in between formal preventive maintenance visits on your electric screw compressor to extend compressor life and prevent downtime.
    April 14, 2025
    They cost more than refrigerated dryers. They need more parts and service than refrigerated dryers. They increase demand for compressed air. So when should you use a desiccant...
    April 14, 2025
    Follow these ten steps for energy savings in your compressed air system.