Grieve's No. 1033 oven is designed to feature 8” thick insulated walls plus an aluminized steel exterior
Grieve's No. 1033 is designed to be a 500ºC (932ºF) inert atmosphere oven made for heating polymer fibers at the customer’s facility. Workspace dimensions of this oven are constructed to measure 54” W x 36” D x 84” H. 60 KW, and are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 10,000 CFM, 7-1/2 HP recirculating blower provides vertical downward airflow to the workload.
This Grieve oven is designed to feature 8” thick insulated walls plus an aluminized steel exterior and Type 304, 2B finish stainless steel interior. The inert atmosphere construction is constructed to comprise a gas pressure regulator, flow meter, pressure gauge, internal high-temperature gasket, all welded expansion connection in doorway throat, air jacket on inner oven for cooling, ½” thick cellular silicone rubber atmosphere seal, blower shaft seal, pneumatic positive latching door hardware, adjustable offset door hinges, outlet with pressure relief, interior seams all welded gas-tight plus all wall penetrations are made to be fitted with compression fittings. A 0-1500 CFM blower is designed to pull air through the air jacket on the inner oven for faster cooling.
Controls on No. 1033 are made to include a digital programming temperature controller, manual reset excess temperature controller with separate contactors, recirculating airflow safety switch, paperless event recorder, SCR power controller and trace level oxygen analyzer.