Wago adds eight-channel, configurable digital input/output (DIO) modules to its IP67 Speedway 767 I/O-System

Wago has added two eight-channel, configurable digital input/output (DIO) modules to its IP67 Speedway 767 I/O-System. Configurable channel-by-channel, the 767-5801 and 767-5802 modules (24V DC, 0.5A) run in direct input (DI), direct output (DO) or mixed DIO modes.

767-5801 (8xM8 connectors) and 767-5802 (4xM12 connectors) record binary signals from sensors, proximity switches and controls actuators, e.g., DC contactors or indicators. Capable of channel and module diagnostics, the 8DIO Modules provide parameterization of filter, inversion, substitute value strategy, manual mode and online simulation. Additionally, the modules can be configured with two 1kHz counters with event, gateway time or pulse duration modes. They can also directly switch module outputs based on counter status.

Speedway 767 accommodates up to 64 I/O modules/station, 8 channels/module, 512 channels/station and 50 meters between digital, analog or specialty modules. M8/M12 molded cables handle all power and signal transmission. The system is programmable via CoDeSys 3.0 and configurable via FDT/DTM technology. Supported protocols include: EtherNet/IP, Modbus/TCP, ProfiNet, Profibus, DeviceNet and CANopen.

product-digital-input-output-module.jpg
Category:
Product Type:
Manufacturer:
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments