Phoenix Contact's UT series of screw-clamp terminal blocks comes in a three-level version

Phoenix Contact’s UT series of screw-clamp terminal blocks comes in a three-level version. The UT 2.5-3L accepts solid, stranded or ferruled wires with 26-12 AWG. Vertical bridges electrically connect all three levels to one another. Each terminal point has a labeling space for identification.

The UT 2.5-3L series features Phoenix Contact’s Reakdyne screw-clamp design to prevent screws from backing out. Components are manufactured from corrosion-resistant copper alloy.

UT 2.5-3L terminals have current ratings of 300 V at 20 A or 600 V at 5 A under UL file # E60425. These limited ratings are applicable for use in or with industrial control equipment where the load on any single circuit does not exceed 15 A at 51-150V; 10 A at 151-300V; or 5 A at 301-600 V, or the maximum ampere rating, whichever is less.

product-screw-clamp-terminal-blocks.jpg
Category:
Product Type:
Manufacturer:
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments