ITW Devcon's DFense Blok wearing compound can be used with DFense Blok Surface Wetting Agent

ITW Devcon's DFense Blok wearing compound is an alumina ceramic bead-filled epoxy compound that, when used with DFense Blok Surface Wetting Agent, is designed to increase drop impact strength. DFense Blok Surface Wetting Agent is a two-part thixotropic epoxy gel system that is engineered to improve the ease of application and cured adhesion properties of DFense Blok wearing compound.

Available in 30-pound pails, DFense Blok is mixed in a 2:1 ratio and has a working time of 25 minutes at room temperature. A non-sagging compound, it can be applied by trowel at thicknesses of ¾ inch on vertical surfaces and ½ inch on overhead surfaces. It achieves functional cure in 4-5 hours. It is designed for wear and abrasion resistance, and is made to withstand high-impact conditions and service temperatures up to 300° F.

Using DFense Blok Surface Wetting Agent is engineered to improve the adhesion of DFense Blok. Once it has been applied, there is no wait time before applying DFense Blok wearing compound.

product-wearing-compound.jpg
Category:
Product Type:
Manufacturer:
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments