Plast-O-Matic's electrically actuated polypro ball valve will automatically accept virtually any input power signal

Plast-O-Matic Valves has developed an electrically actuated polypro ball valve that will automatically accept virtually any input power signal.

Designed for pure water and chemical applications, the polypro valves are molded with non-pigmented, plasticizer-free homopolymer resin and are assembled “dry” to eliminate contamination. Available in 3/8-inch to two-inch sizes, these valves meet FDA and NSF requirements.

The Series EBVA electrical actuator is available assembled to the valve and is also sold separately for future field installation. Standard voltage is 85 through 240 AC or DC; an optional version is offered for 12 to 24 volt AC or DC operation. The actuator automatically adjusts to the voltage provided within its range, providing 177 in/lbs of torque with an 11 second cycle time. Manual override and status lights are standard; fail-safe and modulating control actuators are also available.

Product_PolyproBallValve.jpg
Category:
Product Type:
Manufacturer:
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments