Birchwood Casey's Dri Touch Non-VOC provides long-term corrosion protection without volatile organic compounds

Birchwood Casey's Dri Touch Non-VOC is a corrosion preventative that contains no VOC’s (volatile organic compounds) and forms a colorless, dry-to-touch protective film suitable for all metal surfaces.

With a 248°F flash point, the Dri Touch Non-VOC is effective in manufacturing plants that are under air quality restrictions or in areas with flammability hazards, such as the heat-treat department, or areas with gas-fired space heating, etc. It can be used without causing air contamination or fire safety problems.

Dri Touch Non-VOC can be applied to wet or dry surfaces by immersion or pump spray techniques. It can be used as a corrosion preventive over black oxide or phosphate conversion coatings because it seals out corrosion and enhances depth of color. It can also be used on uncoated metal surfaces for long-term storage. The non-conductive Dri Touch film dries and lubricates components without interfering with proper operation. It is compatible with most lubricants, hydraulic oil and cutting oil.

Dri Touch Non-VOC liquid has a thin consistency —similar to penetrating oil — that quickly penetrates recessed areas and lifts moisture from blind holes. Just as quickly, it forms a protective barrier film that resists harmful atmospheric humidity and corrosion.

Rated for 100-150 hours salt spray and 600+ hours humidity protection, Dri Touch Non-VOC meets water displacement test Mil-C-16173 and stain test Mil-C-22235A. It has a pale, amber liquid appearance with a film thickness of 0.15 mil and provides effective coverage of approximately 1500 square feet per gallon.

Product Type:
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.


No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments