Impco's Imseal-800 epoxy resin cures at room temperature to provide long-lasting repairs

Imseal-800, a high-strength epoxy resin from Impco, makes permanent repairs in any industrial maintenance, repair, production and tooling application. Packaged in a two-part separation package, the Imseal-800 cures at room temperature, or can be accelerated by heat, and provides resistance to pressure, impact, and a range of chemicals and temperatures.

Imseal-800 fills surface defects where welding or brazing would be impractical. With special techniques, it goes deep inside cavities, inclusions and porosity in metal. Imseal-800 hardens to a permanent seal that can be drilled, tapped or machined. Resistant to most fuels, oils, alcohols, glycols, solvents, salts, mild acids, Freon, and other common liquids and gases, cured Imseal-800 typically withstands constant service temperatures from -65 to 350°F. It has a Rockwell hardness of 97, a tensile strength of 9,000 psi, a compressive strength of 35,000 psi and a compressive yield of 16,500 psi (typical maximums).

Imseal-800 is packaged in a pre-measured system that is activated by mixing the two parts inside the sealed packet. Once mixed, the clear, low-viscosity (750 cps), modified epoxy has a pot life of ± 45 minutes at room temperature, and the package can be used as the applicator.

Product_IMSEAL-800.jpg
Category:
Product Type:
Manufacturer:
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments