Hobart Brothers' FabCO Hornet gas-shielded flux-cored welding wire can be used in all positions

For welding applications that demand weld penetration, high productivity rates and low-temperature impact strength, Hobart Brothers introduces its FabCO Hornet gas-shielded flux-cored welding wire. Designed as a general fabrication welding wire for mild or low alloy steels, the FabCO Hornet wire can be used in all positions with either 100% CO2 or a 75% Ar/25% CO2 shielding gas mixture. To increase welding productivity, the wire features a removable slag and low spatter levels. The FabCO Hornet wire also produces a low amount of welding fumes.

Available in .045-inch, .052-inch and 1/16-inch diameters, the FabCO Hornet welding wire produces a flat bead profile and is suitable for either single- or multi-pass applications. It also meets the optional H8 diffusible hydrogen requirement. Classified under American Welding Society code A5.20 as E71T-1C H8, E71T-1M H8, E71T-9C H8 and E71T-9M H8, the FabCO Hornet welding wire features a tensile strength of between 70,000 and 95,000 psi. Typical impact strength is 75 ft-lbs at –20°F when used with a mixed shielding gas.

Product_FabCO.jpg
Category:
Product Type:
Manufacturer:
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments