Intertec's passively cooled enclosure keeps electronics 10 degrees cooler

Intertec introduces a passively cooled enclosure that exploits a phase-change material to maintain the temperature of electronics equipment at 10° lower than peak ambient temperatures. Requiring no power supply to operate, Intertec has produced a standard cooling enclosure with enough internal space to meet common application requirements, such as the pressure transmitters and process analyzers used on oil and gas pipelines running through desert environments.

Passive Cooling Systems (PCMs) can provide a cooling mechanism by absorbing and storing the large quantity of energy needed to change the material's state from solid to liquid as the melting point is passed during the normal daytime temperature rise. This energy is then released as the PCM re-solidifies during cooler periods, making it ideal for use in desert locations with their cold nighttime temperatures.  For this application, Intertec has chosen a PCM with a phase change temperature of 34°C. 

The PCM provides about 25 liters of usable space for mounting electronics equipment, and will dissipate up to 10 W of heat. There is no need to add fans or vents, so an enclosure's environmental ingress protection (IP rating) against dust and water remains unchanged.

The phase-change material is located at the back of the enclosure, behind a mounting panel. The electronic device or equipment to be protected is attached to this panel with as large a contact area as possible to aid heat conduction. Intertec offers ready-to-use pipe clamp-like accessories for mounting process transmitters, and will also fabricate simple mechanical panel-mounting accessories for other equipment shapes such as small electronics modules. 

The enclosure itself is fabricated using insulated construction principles developed and field proven by Intertec over many years. The basic material used is long fibre reinforced glass-reinforced polyester (GRP) sheeting, which provides great structural strength, combined with high resistance to weather and the corrosive effects of aggressive chemicals. Special mounting and construction principles for the internal components then ensure that the very high degree of thermal insulation provided by this shell is not compromised by providing a path for heat conduction. The enclosure is also compatible with Intertec's standard range of accessories including sun shades to protect the top and/or sides, to provide further optimization of the enclosure for use in hot environments.

Intertec's enclosure can deliver reductions in system building costs. Alternative cooling mechanisms such as air conditioning and vortex coolers usually involve thousands of dollars of extra hardware costs, as well as the need for a local power supply to power the pumps/compressors required. These costs can escalate again if explosion-proof protection is required, as is typically the case for pipeline equipment. Peltier coolers are an alternative for smaller-scale electronics, but their relatively low efficiency means that a substantial local power supply can be required. Such cooling methods typically necessitate connections between the internal and external environments as well, such as vents or fans, complicating the provision of protection against dust and rain.

Intertec.jpg
Category:
Product Type:
Enclosures
Manufacturer:
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.

Comments

No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments