Endress+Hauser's Promag 53 electromagnetic flowmeter features EtherNet/IP connectivity

Endress+Hauser's Promag 53 electromagnetic flowmeter features EtherNet/IP connectivity for integration with the Rockwell Automation PlantPAx process automation system. The Promag 53 flowmeter measures electrically conductive liquids (> 5 µS/cm).

The Promag 53 flowmeter features an integrated Web server that allows authorized users to remotely view flow data, conduct diagnostics, configure the flowmeter or perform process optimization. Data can also be accessed by higher-level software such as ERP systems, process historians, control loop tuning programs and asset management systems. By using EtherNet/IP, up to 10 variables can be configured, including volume flow, calculated mass flow and totalized flow for remote access.

In addition to EtherNet/IP connectivity, the Promag 53 electromagnetic flowmeter has built-in connectivity to Foundation Fieldbus, Profibus, Modbus and HART.

Promag 53 is designed to measure most liquids with a minimum conductivity of 5 μS/cm, and flow rates up to 1,250 gallons per minute. A minimum conductivity of 20 μS/cm is required for measuring demineralized water. Measuring accuracy is ±0.2% or. ±2 millimeters per second, and repeatability is ±0.1 percent or ± 0.5 millimeters per second. The flowmeter operates in temperatures of -4° F to 140° F (-20° C to 60° C) and pressures up to 580 psi, has NEMA 4X or IP 67 protection, has FM/CSA Class I, Division two approval, fulfills EMC requirements according to IEC/EN 61326 and NAMUR NE21, conforms to the requirements of the EU and ACMA directives, and carries the CE and √ marks.

Company Information

Endress+Hauser

Website: www.us.endress.com