To maximize the utility of diagnostic equipment used in chemical processing, technicians must stretch their knowledge of control valves and related diagnostic equipment that keeps tabs on valve health and safety. Too often, maintenance data isn’t used as effectively as it could be, and institutionalized half-measures result in lost money, time, safety and efficiency. To make the most of valve diagnostic data, technicians must understand the ways that data can be lost, ignored or misused.
The advanced technology represented by online diagnostics has been around for 15 to 20 years, and is only recently moving out of its infancy into a mature role as an industry standard. In the past, plants were forced to use manual tests to identify a valve’s performance complications. Diagnostics were developed as a way to cut expenses by eliminating the need to halt production to extract each valve for testing.
“Never make the mistake of assuming a valve is functional just because itís new. When a valve first arrives, test it before installing it.”
The type of valve diagnostics to be performed determines cost savings. Plants might be unaware of the diagnostics equipment for testing a variety of valves. It’s possible to diagnose problems in control valves and rotary valves (with or without instrumentation) and any valve having an air-operated actuator (spring return or double acting) using either transducers for different pressure ranges or preload with additional supplies. These techniques can be performed on valves that lack instrumentation. Using them allows you to examine spring ranges, valve performance, friction, seat load and actuator leaks.
Never make the mistake of assuming a valve is functional just because it’s new. When a valve first arrives, test it before installing it. This way, deficient valves can be returned without setup effort or wasting time installing them. Also, making certain that valves placed in service are completely healthy is important. Once they’re set up and tested, document their properly installed functionality.
But, the first step in achieving effective valve diagnostics is to train personnel in control valves anatomy function. Technicians who don’t understand a valve’s function can’t be expected to make the valve operate consistently at peak performance. Then follow the 10 tips for diagnosing control valve problems.
- Keep good records
This basic truth is vital to every aspect of your valve wellness program. Record every change and repair as well as details about the valve’s history and current performance. During a turnaround, provide copies of these valve records and performance standards to your repair vendors. This ensures that everyone works from the same page without reams of unnecessary paperwork.
When repairs are completed, test the valve for satisfactory performance and document the results before reinstalling the unit. Update the maintenance history and make sure the repair shop provides its test data to the plant for archiving.
- Make obvious repairs up front
Before doing anything else, repair the obvious problems such as leaky tubing and gauges. Then, run diagnostics to measure three pressure readings: transducer pressures, actuator pressures and supply pressures. Cylinder actuators (consider these “double acting” actuators) are a different configuration, comprised of upper and lower cylinder pressures.
- Test initial controlling devices
This is the device that receives the first indication of change or problems in the process flow. Examples include transducers, temperature controllers, pressure controllers and level controllers. Locating and testing these first may save you time, money and unnecessary plant shutdowns. If you simply bypass the transducer, you risk overlooking the true problem with the control valve. If the transducer is remotely mounted, extend test leads to reach them.
- Check positioner points
Positioners change the pneumatic pressure to operate an actuator and to overcome friction and pressure imbalance. Positioners put distance between controllers and control valves and increase the speed of a control valve’s response to changes. It’s imperative that positioners function correctly, especially at high pressures or for complicated chemical processes.
Accessing all positioner points is critical when measuring transducer, actuator and overall valve performance. To troubleshoot a valve, put the valve in its fail position, disconnect the positioner and verify that the valve’s handwheel is fully backed out. Next, check the positioner and controller for physical damage. Regularly testing properly calibrated diagnostic equipment against functional valves is essential for all of these procedures.
- Take accurate travel measurements
Ensure that travel measuring centers are properly set and positioned. Diagnostics measure the travel of a control valve with a travel transducer. On globe valves, it’s important to use the right scale. It’s also important that the correct travel variables are used in determining the length of travel. Ensuring that the correct configuration is vertical will have a major effect on the testing results. There are to be no angles or slacks, which can result in false measurements.
The travel transducer must be placed directly on the valve stem, not on the positioner, linkage or actuator. Direct placement on the stem effectively determines how far the valve has traveled. The ultimate objective is to find out what the valve is doing.
- Use correct inputs
Ensure that the proper control valve parameters are input into diagnostic machinery. Diagnostics look at valve performance while keeping in mind manufacturer guidelines and specifications. Diagnostics equipment can’t tell if a fluid is flowing through the valve, but it can determine if a valve has the wrong spring or settings, if the diaphragm settings are correct, if the seals are bad, and if the positioner is producing problems arising from wrong settings or improper maintenance.